| ---------------- DRYWALL
TOOLS ---------------- (Click on image to enlarge Best viewed at 800x600) |
|
DRYWALL JOINT KNIFE |
|
---------------- DRYWALL JOINT KNIFE ---------------- |
|
| ADVANCE "original" drywall joint knife.
Made from the finest flexible tempered spring steel, resulting in a straight blade, free
from waves. Sturdy steel rib prevents blade from taking a "set". Comfortable
sealed wood handle. Blade dipped in tough clear coat to prevent rust from atmospheric
conditions. Available in 6 to 24 " widths and 3 or 4 " lengths extending from
bolster. Also made in Stainless Steel. Blue
Steel |
 |
|
Stainless Steel No. 06-3SS 6" Pack 6 No. 08-3SS 8" Pack 6 No. 010-3SS 10" Pack 6 No. 012-3SS 12" Pack 6 No. 014-3SS 14" Pack 6 |
 |
| Same as 010-3 except with shorter, wider, handle
which is sometimes referred to as a "West Coast" handle. Available in 6 to 14
" widths
Blue Steel |
 |
 |
|
| Our economy drywall knife, but still made with the
professional in mind. Flexible blue spring steel or stainless steel held in an
aluminum rib. Sturdy textured gray handle is molded directly to blade. Available in 6
to 14 " widths Blue Steel No. 34006 6" Pack 6 No. 34008 8" Pack 6 No. 34010 10" Pack 6 No. 34012 12" Pack 6 No. 34014 14" Pack 6 Stainless Steel No. 35006 6" Pack 6 No. 35008 8" Pack 6 No. 35010 10" Pack 6 No. 35012 12" Pack 6 No. 35014 14" Pack 6 |
 |
|
|
| Long handle taping knife. Same material as regular
blue steel knife, but with 16" long reach wood handle. Available in 8 to 24 "
widths. No. 08-3LH
8"
Pack 6 |
 |
|
|
| ---------------- ADVANCE
MUD PANS
---------------
|
|
| Made of stainless steel. Has 3 leak proof heli-arc
welds on each end. Very comfortable to hold. No. 10H 10" Pack 6 No. 12H 12" Pack 6 No. 14H 14" Pack 6 No. 16H 16" Pack 6 |
 |
| Heavy duty stainless steel mud pan Tapered
ends and sides. Spot welded. Sides are sheared to clean knife easily. No. 8SS 8" Pack 6 No. 10SS 10" Pack 6 No. 12SS 12" Pack 6 No. 14SS 14" Pack 6 No. 16SS 16" Pack 6 |
 |
| Heavy gauge galvanized mud pan Our most
popular mud pan. Tapered ends and sides. No. 8G 8" Pack 6 No. 10G 10" Pack 6 No. 12G 12" Pack 6 No. 14G 14" Pack 6 No. 16G 16" Pack 6 No. 18G 18" Pack 6 No. 20G 20" Pack 6 No. 22G 22" Pack 6 |
 |
| Plastic mud pan has two steel blades on pan for
wiping tool blade clean. No. 12P 12" Pack 24 |
 |
|
|
| ---------------- MUD PAN HOLDERS ---------------- | |
Aluminum light-weight construction, hooks on to belt freeing both hands to work. Hook below pan holds roll of drywall tape. No. PH12 Pack 6 |
 |
|
|
| ---------------- UNIVERSAL POLE SANDER ---------------- | |
Strong, but lightweight aluminum
base; strongly bonded rubber pad, wing nuts tighten sandpaper clamps. Swivel head allows
you to reach all corners. 9 ¾ x 3 ¾" No. K318
w/ 4' metal
handle Pack 6 |
 |
|
|
| ---------------- HAND SANDER ---------------- | |
Wood float handle giving plenty of
knuckle room. Uses die cut sandpaper. 9 3/8" x 3 1/4". No. 441 Pack 6 |
 |
|
|
| ---------------- ROLL LIFTER ---------------- | |
Allows one man to lift board up to 3 ". Heavy steel construction, ribbed back stiffens lifter. Roller-wheel moves board against wall. No. RL93 Pack 6 |
 |
|
|
| ---------------- MINI LIFTER ---------------- | |
| Holds drywall sheets in place while
nailing or using screwgun. Welded steel construction, plated. Fits in pocket or tool belt. No. ML94 Pack 6 |
 |
|
|
| ---------------- DRYWALL TROWEL ---------------- | |
| Has curved carbon steel blade to finish drywall
joints. Lightweight, flexible tool with comfortable wood handle.11" X 4 ½". No. DT11 Pack 4 |
 |
|
|
| ---------------- INSIDE CORNER TROWEL ---------------- STAINLESS STEEL |
|
| Formed from flexible stainless steel, with wood
handle. Perfect corners are created by flexing 103 degree angle to 90 degrees, 4" x
5". No. 212SS Pack 6 |
 |
|
|
| ---------------- OUTSIDE CORNER TROWEL ---------------- | |
| Stainless steel, with wood handle. 80 degree angle
flexes to 90 degrees when in use. . Outside edge dimensions are 4 ¼" x 2 ½". No. 213SS Pack 6 |
 |
|
|
| ---------------- FAN BLADE MIXER ---------------- | |
| Zinc plated, welded to non-slip steel hexagon shaft
for durability. 5 " diameter blade, 24" x 3/8" hex shaft for 1/2" slow
speed drill. No. FM24 2 blade
mixer Pack 6 |
 |
|
|
---------------- FAN BLADE MIXER ---------------- |
|
| Zinc plated, welded to non-slip steel
hexagon shaft for durability. Adjustable 5 " diameter blade, 24" x 3/8" hex
shaft for 1/2" slow speed drill. No. FM24A
2 blade mixer Pack 6 |
|
|
|
| ---------------- EASY MIXER ---------------- | |
| For mixing paint, mud, texture cement, etc. Plated
to resist rust, with 3/8" hex shaft for 1/2" slow speed drill, 28" and
36" shaft lengths. No. EM94 Pack 6 |
 |
|
|
| ---------------- TAPE HOLDER ---------------- | |
| Plated to resist rust. Holds up to 500
ft. roll tape and hooks on to belt. No. TH50 Pack 6. |
 |
|
|
| ---------------- WALL SCRAPER ---------------- | |
| Spring steel blade bolted to aluminum angle
mounting attached to 4 ft steel handle, with plastic grip. Tempered steel blade for
perfect wall cleaning or scraping. Also available with wood handle. Blade 4" x 18" wide or 4" x 24" wide. No.
WS18 18" with metal handle Pack 6 Replacement Blades |
 |
|
|
---------------- WIPE DOWN KNIFE ---------------- |
|
Comes equipped with removable 4' metal handle. Blade is equipped with proper angle for smoothing spray-on ceilings and securely fastens to aluminum angle mounting bracket. Has one angle reversed to catch excess material. No. WD24 24" with metal handle
Pack 6 |
 |
|
|
---------------- POLE SPONGER ---------------- |
|
|
Sanding sponger Reversible 4 in. x 9 in. x 3/4 in. sanding
sponge lasts 25 times longer than sandpaper. One sponge will do a 26,000 sq.
ft. area can be used wet or dry. |
 |
|
|
|